after the stainless steel clamp is installed, it is necessary to clean all the system pipe fittings. the stainless steel clamp manufacturer tells you to ensure that the inside of the pipe fittings is clean and no debris is left, so as to ensure that the water passing through is clean.

the stainless steel clamp manufacturer tells you that we must first ensure that the pressure test of the pipe fittings is qualified, and then clean it before the official commissioning operation. for flushing money, we need to select suitable water inlet pipes and drain pipes to ensure that the sundries in the pipes are cleaned out. the diameter should be smaller than that between the flushing pipes, up to 60%, which is convenient for the drainage pipes to enter and exit the pipes. the pressure during flushing can reach the maximum pressure that the stainless steel clamp connector can receive, and the color of the drain water is normal. it can only be determined that it is clean and qualified.
the above is the introduction of the cleaning method after the stainless steel clamp connector is connected, i hope it will be helpful to you.