how to install the stainless steel straub clamp support effectively and reasonably:
1. before the installation on the welding plate, in order to better determine the direction of the chuck, it is recommended to mark the chuck in the fixed position first, and then weld, pierce the lower part of the chuck body, and then put the plastic stainless steel of the pipe to be fixed. put the straub clamp in, place the stainless steel straub clamp and the other half of the cover plate, tighten them with screws, do not directly weld the chuck base plate.

2. on the rail of the ground installation, the rail can be welded to the foundation or fixed with screws. the stainless steel straub clamp then pushes the rail nut into the rail and rotates it 90 degrees. the bottom half of the stainless steel straub clamp is embedded in the nut. the fixed stainless steel straub clamp and cover plate are installed on the upper part of the stainless steel straub clamp and fixed with screws.
3. superimposed assembly, the guide rail can be welded on the foundation or fixed with screws. first, install the aluminum alloy stainless steel straub clamp and the lower half of the stainless steel straub clamp, and then place the upper half of the stainless steel straub clamp where needed. fix the fixed pipe with screws, and use the anti-loosening cover to prevent it from rotating, and then install two stainless steel straub clamps in the same way as above.
4. the bending device, when installing the bending pipe, the straight hydraulic stainless steel straub clamp should be connected to the front and rear of the bending pipe and fixed with the stainless steel straub clamp. it is advocated that such supporting points should be in a fixed position.
fixed pipe support---bearing device series products, widely used in light pipe support places where displacement stress is required for pipelines or equipment in electric power, metallurgy, petroleum, chemical and other industries, as well as vibration damping or sliding supports such as bridges, buildings and large equipment occasion.
in addition to supporting weight, restricting (or guiding) displacement, controlling vibration (sloshing) and reducing thrust, the fixed pipe support device has simple structure, large bearing capacity, strong adaptability to heavy pipe clamps, long service life, and price low cost and other advantages.